AMFLOW PR CARBON PRO PRE-ORDER DEPOSIT

1. The Avinox M2S Drive Unit has a rated power of 250W, with a peak output power of up to 1500W in Trail, Turbo, Auto and Boost modes and a maximum torque of 150N·m in Boost mode. Compared to the Avinox M1 (peak power 1000W, maximum torque 120N·m), power and torque are increased by approximately 45.9% and 21.6%, respectively. Actual output performance may vary depending on usage scenarios, riding modes, and system status.2. The bike offers 5 headset angle settings, 2 bottom bracket height settings, and 4 chainstay length settings. Users can combine these settings based on different riding styles and terrain conditions. Theoretically, these parameters can form up to 40 geometry configurations. The specific adjustable range and applicable effects are subject to actual usage.3. Measured on Amflow PR Carbon (Size M), including front and rear triangles, links, pivot bearings, bolts, and washers.4. Data was measured for Avinox in a quiet, open indoor environment using a binaural microphone at an axial distance of 0.1m and a height of 1.5m.5. The 158km range was measured on a flat paved road with an 80kg rider on Amflow PR Carbon (800Wh). Testing was conducted in the Eco assistance mode at a cadence of 65rpm and a speed of 21km/h, with default assist settings. Actual range depends on factors like temperature and wind speed. Results may vary.6. The data is derived from laboratory comparison tests: charging the Avinox RS800 Battery (from 0% to 80% SOC) using the Avinox 508W Charger is approximately 3 times faster than using the Avinox 168W Charger.7. When used as an external battery, the Avinox RS600 Battery is only compatible, due to size constraints, with L, XL, and XXL frame sizes of Amflow PR Carbon and XL and XXL frame sizes of Amflow PR Carbon Pro. Sold separately. Additional configurations coming soon.8. The data is based on the Amflow PR Carbon Pro M-size complete bike (tubeless setup). Actual product weight may vary due to personalized configurations (e.g., lights, pedals), manufacturing batch differences, and external factors. Please refer to the actual product. Additionally, the weights of the Avinox M2S and M2 Drive Units exclude heatsinks.9. As of April 9, 2026, according to Amflow's research on multiple bike models on the market.10. Boost mode can be maintained for a maximum of 60 seconds, after which it will automatically switch back to the previously selec11. Data is derived from Avinox laboratory calculations, based on a comparison with the Avinox M1 Drive Unit under identical testing conditions.12. Amflow PR supports route file import in GPX, FIT, and TCX formats. Offline navigation is currently limited to a mapless mode, displaying only the route track.13. When the Avinox Drive System is offline and not being charged, it communicates with the Avinox Ride app every 30 minutes (approximately) to sync system status. As a result, bike location change alarms may have an up to 30-minute delay between the actual bike movement and the alert.14. With the Avinox Drive System online, this function can be achieved when the mobile phone and bike communicate via Bluetooth network. If the system is offline and the bike detects abnormal movement, this function can also be triggered when the phone and bike communicate via Bluetooth network. With a Bluetooth connection, in an environment free of interference and obstructions, the effective range of this function is approx. 10 meters (32 feet). However, performance may be affected by the mobile phone or other devices used. Actual experience may vary.15. Apple Find My is available exclusively on Amflow PR models, enabling location tracking without relying on a 4G network.16. Amflow PR and the Avinox Drive System are certified by TÜV SÜD and the chargers by TÜV Rheinland.17. All the above data was measured while charging the Avinox RS800 Battery in a well-ventilated indoor environment at a room temperature of 26°C.